SDS Carbide Masonry/Concrete Core Drill Bit 2" x 6"- Used for Concrete Masonry Brick with Rotary Hammer Drill

[Shop Now !!!]

Heleta's thick walled Carbide Tipped Masonry Core Bits are ideal for large hole drilling through concrete (not recommended for steel) and masonry using a Rotary Hammer Drill. Our carbide tipped core bits are widely used by plumbing electrical and mechanical contractors in applications such as drilling for railing installations through wall drilling for electrical conduit plumbing and sanitary pipe and relocating anchors using chemical anchoring systems or grout-in-place anchors. Specialty applications include pest control as well as rigging and firestop systems. Reusable shanks for SDS-Plus SDS-Max and Spline hammer drills are available separately. No reason to buy another shank with each core bit like some other integrated designs.

• 
  Arbor: 22mm
  Diameter: 2"
  Disc Type:
  Grit:
  Length:
  Machine: Rotary Hammer Drill
  Material: Carbide
  Max RPM:
  Shank: SDS Plus SDS Max and Spline with 22mm threading available. Shank and Pilot Bit Sold Separately
  Tooth Count:
  Use: Concrete Masonry Brick


• WARNING!
  To prevent serious injury: Wear eye face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.


• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they're received before 12:00 noon CST.


• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Lenox 30883-VB3 Vari-Bit 1/4-Inch to 3/4-Inch Step Drill Bit with 3/8-Inch Shank

[Shop Now !!!]

Feature high speed steel construction and steam oxide coating. Patented design two cutting flutes allow for clean burr-free holes. Cust through materials faster than standard bits. Eliminates the problem of tip breakage on standard drill bits.

• Accurate burr-free holes


• Starts drilling on contact


• Shank Size (inches): 3/8"


• Steam oxide coating adds durability


• Two flute design cuts fast clean round holes

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

CMT 543.079.51 5/16" Mortising Chisel & Bit Set

[Shop Now !!!]

(This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy even with all the other joining options in the world of woodworking. It isn't the easiest joint to make but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic Shop Fox and Jet mortisers. Delta requires a bushing)[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud BP63570R Industrial Carbide Tipped Brad Point Boring Bit Right Hand 1/4 inch Diameter- 10mm Shank- 70mm Length

[Shop Now !!!]

Freud's industrial carbide tipped brad point boring bits are designed for multiple spindle machines. The 10mm x 20mm shank are compatible with most boring machines. Drills all composition materials solid surface materials plywoods hardwoods and softwoods on automatic or manual multi-spindle boring machines. 1/4 inch diameter 70mm overall length 35mm max hole depth right hand rotation 10mm shank.1/4 inch diameter 70mm overall length 35mm max hole depth right hand rotation 10mm shank.The 70mm long bits have a 10mm x 20mm shank making them compatible with most boring machines.Drills all composition materials solid surface materials plywoods hardwoods and softwoods.Use on automatic and manual muti-spindle boring machinesFreud's Limited Lifetime Guarantee

• 1/4 inch diameter 70mm overall length 35mm max hole depth right hand rotation 10mm shank.


• The 70mm long bits have a 10mm x 20mm shank making them compatible with most boring machines.


• Drills all composition materials solid surface materials plywoods hardwoods and softwoods.


• Use on automatic and manual muti-spindle boring machines


• Freud's Limited Lifetime Guarantee

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

CMT 543.158.51 5/8" Mortising Chisel & Bit Set

[Shop Now !!!]

(This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy even with all the other joining options in the world of woodworking. It isn't the easiest joint to make but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic Shop Fox and Jet mortisers. Delta requires a bushing)[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Pozi-Drive Quick-Change Bit (Set of 3) #3 x 2-3/4"

[Shop Now !!!]

These one-piece driver bits are manufactured from a solid piece of tool steel and then heat treated for durability. (Packaged 3/pack) #3 Pozi x 2-3/4. #3 Pozi is commonly used with 7mm Confirmat style screws.

• Manufactured from a solid piece of tool steel and then heat treated for durability.


• Package of 3

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Freud CB35057R Industrial Carbide Tipped Cylinder (Hinge) Boring Bits Right Hand 35mm Diameter -10mm Shank - 57.5mm Length

[Shop Now !!!]

These industrial carbide tipped cylinder (hinge) boring bits are designed for accurate boring and the two wing cutters and two spur cutters prevent bottom side tear out. The 57.5mm long bits have a 10mm x 20mm shank with an adjustable top screw making them compatible with most boring machines. Drills all composition materials solid surface materials plywoods hardwoods and softwoods. Use on automatic and manual muti-spindle boring machines. 35 mm diameter 57.5mm overall length right hand turn and 10mm shank.35 mm diameter 57.5mm overall length right hand turn and 10mm shank.The 57.5mm long bits have a 10mm x 20mm shank with an adjustable top screw making them compatible with most boring machines.Drills all composition materials solid surface materials plywoods hardwoods and softwoods.Use on automatic and manual muti-spindle boring machinesFreud's Limited Lifetime Guarantee

• 35 mm diameter 57.5mm overall length right hand turn and 10mm shank.


• The 57.5mm long bits have a 10mm x 20mm shank with an adjustable top screw making them compatible with most boring machines.


• Drills all composition materials solid surface materials plywoods hardwoods and softwoods.


• Use on automatic and manual muti-spindle boring machines


• Freud's Limited Lifetime Guarantee

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Lenox 30881-VB1 Vari-Bit 1/8-Inch to 1/2-Inch Step Drill Bit with 1/4-Inch Shank

[Shop Now !!!]

# Steps make hole size identification easy # Double flute design cuts burr-free holes # Drills metals (steel brass copper stainless steel aluminum) up to 1/8" thick as well as wood and plastics # True 135° drill point starts fast no center punching

• Accurate burr-free holes


• Starts drilling on contact


• Shank Size (inches): 1/4"


• Steam oxide coating adds durability


• Two flute design cuts fast clean round holes

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Irwin Industrial Tools 49909 I-100 9/16-Inch Auger Bit

[Shop Now !!!]

Fast and productive the auger has wide flutes for fast chip removal and a screw-tip to assist the user in boring fast clean holes. Diameter (in.): 9/16 Length (in.): 7.5 Twist Length (in.): 4.5

• Solid center design provides extra rigidity while boring


• Wide lands keep the bit straight as it bores through the hole. The flutes are ground behind the lands to funnel chips to the inside of the bit and away from the outside diameter producing a faster cleaner cut


• Single-spur cutting edge scribes the circumference of the hole for a smoother finish


• Coarse screw point provides fast boring in hard and soft woods


• All bits have a 4-1/2-Inch twist length and a 7-1/2-Inch overall length

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Irwin Industrial Tools 341008 Speebor Blue Groove Pro Spade Bit Set with Case 8-Piece

[Shop Now !!!]

Speedbor 8 Piece Pro Spade Drill Bit Set Includes 6" Length Bits With 3/8" 1/2" 5/8" 3/4" 7/8" 1" 1-1/8" and 1-1/2" Bits All Bits Have A1/4" Hex Shank That Fits All Drills and1/4" Quick Change Adapters Patented Micro Groove Cutting Edge and Spurs Produce A Smoother Hole Finish Double Spur Design Scribes The Hole Before The Chips Are Made Producing A Cleaner Hole and Reducing Vibration Rugged Storage Case With Rubber Over Mold For Added Impact Resistance and Sliding Latch Design Provides Added Security.

• Blue-Groove point and cutting edge for faster chip removal - 4x faster than standard spade bits


• Double cutting spurs scribe the outside of the hole reducing breakout


• 10-Percent larger shank for added durability


• Grooved hex shank prevents slipping in drill chuck or bit extension


• Fits all standard quick change chucks

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Irwin Industrial Tools 24605 Machine Screw with Fractional Tap and Die Set 12-Piece

12-piece Machine Screw/Fractional Tap & Hex Die Set in plastic case includes: Machine Screw Plug Tap and 5/8" Hexagon Dies in sizes: 6 - 32 NC 8 - 32 NC 10 - 24 NC 10 - 32 NF 12 - 24 NC. Fractional Plug Tap and 5/8 " Hexagon Dies in sizes: 1/4" - 20 NC. Threading Tools: Plain Die Stock - 5/8" Hexagon Dies T-Handle Wrench - Taps No. 0 to 1/4".

• Thread sizes: 6-32 NC 8-32 NC 10-24 NC 10-32 NF and 1/4"-20 NC


• We're working with a variety of tradesmen to solve endless fastening challenges: Irwin Hanson Taps and Dies are the answer. Whether creating new tools from raw steel or repairing damaged and worn threads achieving a precise fit is essential.


• Irwin Industrial Tools sets the standard for delivering quality every step of the way in your threading applications.


• T-Handle tap wrench

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Irwin 10231 Unibit1 1/8-Inch to 1/2-Inch 1/4-Inch Shank Step Drill Bit

Hanson Step Drills save time by eliminating the need to change drills when drilling round holes in thin materials. Each smaller size drill also acts as a pilot for the next size. The single radial flute assures perfectly round holes. Use on steel brass aluminum and other thin materials. Step Drills are self-starting and will not slip.Drill diameters etched in flute for easy identification.

• Ideal for drilling holes into thin materials such as stainless steel copper brass aluminum plastic and laminates


• Single-flute cutting edge for greater control through steps


• Patented single-flute cutting edge gives the user a true round hole every time


• 3 faltted shank prevents slipping in drill chuck


• New SpeedPoint tip penetrates faster than previous Unibits and prevents walking

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Milwaukee 48-20-5045 3-Inch Core Bit

Milwaukee's Core Bits are ideal for large hole drilling where depth is relatively shallow. The Core Bit cuts a kerf only. The usable depth of Thick Wall Core Bits is 4-3/8 inch. The inside core must be removed by the operator before deeper drilling can be accomplished. The Thick Wall construction is ideal for larger hammers and more seasoned/cured concrete. A 7-1/2 inch extension is available to allow for the deeper holes to be drilled. The appropriate (dependant on the diameter) SDS Plus Drive Shank must be used to drive the Core Bit. Use 48-20-6155 Center Pin and 48-20-6159 Guide Plate for positioning and starting the hole. Thin Wall Core Bits are available from 1 inch to 6 inch diameters. See Thick Wall Core Bits for cured concrete and/or larger hammers. FEATURES: 3 in. diameter. Usable cutting depth 3 in.. Thin wall. Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)

• 3 in. diameter


• Usable cutting depth 3 in.


• Thin wall


• Use with SDS core bit shank 48-03-3555 (8 in.) or 48-03-3561 (12 in.)

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

8 Piece Deluxe Plug Cutting Kit BY PEACHTREE WOODWORKING PW925

This set features the most popular sizes of plug cutters in both straight & tapered styles. The high quality carbon steel cutters make a smooth sided plug with rounded shoulders.

• Made of high-carbon tool steel


• Set features the most popular sizes in both straight and tapered styles


• Makes a smooth sided plug with round shoulders


• Easy insertion into a bored hole


• Plug remains snug in the wood until sawed or broken out with a screw driver

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Irwin 10239 Unibit9 7/8-Inch and 1-1/8-Inch 1/2-Inch Shank Step Drill Bit for-1/2-Inch and 3/4-Inch Conduit

Irwin 10239 High Speed Steel Fractional Self-StartingIrwin 10239 High Speed Steel Fractional Self-Starting Features:; Drill bit ; Ideal for drilling holes into thin material such as stainless steel copper brass aluminum plastic and laminates ; Single flute cutting edge for greater control through steps ; Patented single flute cutting edge gives a true round hole every time; 3 flattened shank prevents slipping in drill chuck

• Ideal for drilling holes into thin materials such as stainless steel copper brass aluminum plastic and laminates


• Single-flute cutting edge for greater control through steps


• Patented single-flute cutting edge gives the user a true round hole every time


• 3 faltted shank prevents slipping in drill chuck


• New SpeedPoint tip penetrates faster than previous Unibits and prevents walking

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Milwaukee 48-25-2001 2-Inch Bit with 7/16-Inch Shank Selfeed Bit

Many Electricians and Plumbers rely on Milwaukee's Selfeed Bits for large hole drilling in wood. The inside cutting plane shaves the hole radius for clean smooth holes without pressure. A removable replaceable feed screw draws the bit into the gummiest of woods effortlessly. A hex shank provides a secure gripping surface for the drill chuck. The bit is coated with a rust inhibitor. Available in 1 inch 1-1/8 inch 1-1/4 inch 1-3/8 inch 1-1/2 inch 1-3/4 inch 2 inch 2-1/8 inch 2-1/4 inch 2-9/16 inch 3 inch 3-5/8 inch and 4-5/8 inch diameters. Use Feed Screw 48-28-6870 Socket Wrench 49-96-0060 and Set Screw 06-83-2625 on diameters less than 3inches. One per package.FEATURES: 2 in. bit diameter. 7/16 in. hex shank. Removable and replaceable feed screw. Cutting edges can be resharpened

• For all types of construction


• Large wide throat design


• Self- feeding screw point


• Diameter 2 in.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

SDS Carbide Masonry/Concrete Core Drill Bit 2.5" x 6"- Used for Concrete Masonry Brick with Rotary Hammer Drill

Heleta's thick walled Carbide Tipped Masonry Core Bits are ideal for large hole drilling through concrete (not recommended for steel) and masonry using a Rotary Hammer Drill. Our carbide tipped core bits are widely used by plumbing electrical and mechanical contractors in applications such as drilling for railing installations through wall drilling for electrical conduit plumbing and sanitary pipe and relocating anchors using chemical anchoring systems or grout-in-place anchors. Specialty applications include pest control as well as rigging and firestop systems. Reusable shanks for SDS-Plus SDS-Max and Spline hammer drills are available separately. No reason to buy another shank with each core bit like some other integrated designs.

• 
  Arbor: 22mm
  Diameter: 2-1/2"
  Disc Type:
  Grit:
  Length:
  Machine: Rotary Hammer Drill
  Material: Carbide
  Max RPM:
  Shank: SDS Plus SDS Max and Spline with 22mm threading available. Shank and Pilot Bit Sold Separately
  Tooth Count:
  Use: Concrete Masonry Brick


• WARNING!
  To prevent serious injury: Wear eye face & body protection. Do not drop. Mount wheel & use wheel properly per ANSI B7.1 OSHA. Use guards.


• Shipping & Shipping Charges
  Combined orders within the continental US will be charged a flat rate of $8 (Ground Shipping Only).
  Heleta reserves the rights to choose the final delivery method. We ship most orders the same day if they're received before 12:00 noon CST.


• Returns & Refunds
  Heleta will refund the entire purchase price for any UNUSED item within 30 days of the original purchase date. No questions asked. To return a unused item please ship the item back to us with a copy of your receipt. We will then credit you back using the same method of the original purchase. The customer will be responsible for all shipping fees unless the mistake was on the part of Heleta.

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

CMT 543.190.51 3/4" Mortising Chisel & Bit Set

(This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy even with all the other joining options in the world of woodworking. It isn't the easiest joint to make but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic Shop Fox and Jet mortisers. Delta requires a bushing)[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

CMT 543.064.51 1/4" Mortising Chisel & Bit Set

(This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy even with all the other joining options in the world of woodworking. It isn't the easiest joint to make but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic Shop Fox and Jet mortisers. Delta requires a bushing)[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

CMT 543.127.51 1/2" Mortising Chisel & Bit Set

(This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy even with all the other joining options in the world of woodworking. It isn't the easiest joint to make but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic Shop Fox and Jet mortisers. Delta requires a bushing)[]

[Compare Product Price!!!]

[Customer Reviews!!!]

[Shop Now !!!]

Milwaukee 49-22-0175 8-Piece Universal Quik-Lok Flat Boring Set

Double wing spurs reduce vibration while creating easy hole formation. Patented cutting edge for easier and faster wood boring over conventional models. Cutting edge removes chips fast. 1 4'' quick change hex shank for use in all universal Quik Lok extensions. Includes: 6'' universal Quic Lok bit extnsion 3 8'' 1 2'' 5 8'' 3 4'' 7 8'' and 1 1 8'' spade bits.

• UNIVERSAL QUIK-LOK - Quick and easy accessory changes. Gives the end user extra bit length in hard to reach areas.


• DOUBLE WING SPURS - Reduces vibration while preventing ?break out?. Spurs allow easy hole formation.


• PATENTED CUTTING EDGE - Easier and faster wood boring over conventional models. Cutting edge removes chips fast dissipating heat from the bit.


• 1/4" QUICK-CHANGE HEX SHANK - For use in all Universal Quik-Lok Extensions.


• Standard Equipment: 6" Universal Quik-Lok All Hex Extension; 6" Flat Boring Bits: 3/8" 1/2" 5/8" 3/4" 7/8"1" 1-1/8"; and Case.

More detail ...

CMT 543.064.51 1/4" Mortising Chisel & Bit Set

• (This chisel has a 3/4" Shank. Make sure that your tool will be able to accept a 3/4") It's tough to beat the "old faithful" mortise and tenon joint for strength and accuracy, even with all the other joining options in the world of woodworking. It isn't the easiest joint to make, but it sure helps to have the best quality tools in your shop. That's why we've added a new selection of Chisel and Bit sets in all the popular sizes, from 1/4" to 3/4" diameter. These sets are for use in any standard drill press mortising attachment of mortising machine. (Verified to fit Powermatic, Shop Fox and Jet mortisers. Delta requires a bushing)